To see some video of the RD2/330 running click here or below, the link will open in a new window.
Utilising 1/8th Circular pitch gearing, these machines are designed for the large volume manufacture of blank labels, tickets, tags or other products from roll fed material. They are heavy duty, industrial quality equipment and should not be confused with bench top type die cutters. Standard equipment includes Coast All Air Web Guide, one magnetic die cylinder to the customers specification, with a repeat length up to 96 tooth, oversize A4, other sizes are available on request. The range can also use conventional rotary dies. Minimum repeat is 70 tooth but we recommend 80 tooth or above for any heavy die cutting. Maximum repeat is 20" or 160 tooth.
Two models are available 250 cut width and 330 cut width, with 265 mm and 345 mm web respectively. The machines have a variable speed drive system with a minimum speed of 10 metres per minute and a maximum of 150 metres per minute.
The unwind is a heavy duty unit with 3" (76mm) expanding core chuck which will take a roll up to 650 mm in diameter. A new pneumatic tension control brake is also fitted, along with a low roll sensing device.
The die cutter unit consists of two stations with the first taking a top cutting die (or magnetic cylinder), the second is a universal type for back perforating, top cutting, sheeting etc. The anvil rolls are of very large diameter and are hardened and precision ground for accurate die cutting.
A single matrix stripper is mounted on the top of the second die station, however stripping can occur at either station.
Rewind tension is adjustable on the run, and rewind roll capacity is up to 560mm diameter. An optional lamination station is available for both self wound or liner type laminates.
Options available for the RD range include:
Shingling sheet conveyor.
The Shingling conveyor has a sheet counter and is set up to seperate the sheets into pre set stack sizes on the run. There are two separate conveyors in the system, one directly driven by the backgear on the RD2 and the second (shingling conveyor) motor driven and speed adjustable by the operator for the best performance.
RD Scorer.
All machines are built to comply with European standards and are
guarded to AS4024.2.
Power Requirements: 380/415VAC; 50Hz; 3 Phase; 15 Amps/Phase (208/230VAC; 60Hz 3 Phase; 20 Amps/Phase. By Arangement)
Home Page/Product Range/Agents Details/Service Advice/ WebCam Service Call/Sales Enquiry